News Center
What are the characteristics of pool-specific tiles?
The construction of the swimming pool largely depends on the swimming pool paving.Special pool tilesWhether it meets the standards. During the paving process, no mistakes can be made; otherwise, it is easy to cause tile cracking and crazing. So what are the characteristics of special tiles?Special pool tilesWhat aspects need to be paid attention to during the paving process?Special pool tilesUsually, swimming pools use special tiles,
because they have the following characteristics:Special pool tiles1. Safe to walk on, with no sharp corners. 2. Safe design and production. 3. Unique fitting function design, enhancing the stability of the fit. 4. High-temperature burning, special green ecological tiles. 5. Corrosion resistance and wear resistance. 6. It can resist erosive water quality. 7. It can resist the erosion of detergents. 8. It does not change color or fade in sunlight. 9. Long lifespan. 10. Resistant to water pressure and soaking.
These are the functions and characteristics that professionals should at least possess. Otherwise, if ordinary tiles can be used to pave the swimming pool, there is no need to make a new type of tile, and the price is also more expensive than ordinary tiles.
There are many types: ceramic mosaics, glass mosaics, glazed tiles, shell mosaics, marble mosaics, etc. There are also many differences in tile specifications:Special pool tiles23x23mm, 25x25mm, 48x48mm, 115x240mm, 300x300mm; not only that, but there are also different regulations on site selection, especially for national standard swimming pools and gymnasiums, which are all standard competition swimming pools and are regulated to only use standard specifications.
Special pool tilesNow many civilian swimming pools are paved like the picture,with gaps left in the middle to facilitate paving and increase slip resistance.1. Preparation for paving construction:
1. All base surfaces should be solid, smooth, dry, clean, free of oil, wax, and other debris.Special pool tiles2. Brush a 10% caustic soda solution on greasy base surfaces, then wash with clean water, and wait for it to dry before proceeding to the next step.2. Paving construction process:
The tiling of the swimming pool must go through the following construction processes:
1. Concrete pool wall. 2. Interface treatment with additives. 3. Leveling with cement mortar (cured within 7 days). 4. Waterproof treatment. 5. Interface treatment. 6. Waterproof treatment. 7. Interface treatment. 8.
Tile adhesive (must use professional tile adhesive for paving). 9. Grout for filling joints.
3. Precautions during the operation process and period.
1. Roughening the base surface:Clean the base surface and wait for it to dry before proceeding with interface treatment.Special pool tiles(The volume ratio of water to cement is 1:2).2. Cement mortar mixing ratio:
Cement 50 kg, medium sand 125 kg, plus an appropriate amount of water. Make a 13 cm leveling layer of mortar. Mix the cement mortar 1-2 times according to the ratio to complete a 1-3 cm thick cement mortar leveling layer. After the leveling layer dries (7 days), use waterproof mortar for waterproof treatment.
3. Use after the waterproof mortar dries.
What we need to pay attention to is that due to the water pressure of the swimming pool, as well as the expansion in hot weather and contraction in cold weather, it is easy to cause arching or even bursting.Therefore, it is recommended that the spacing be 10mm.
2.水泥砂浆配合比：
水泥50公斤，中砂125公斤，加适量水。做13cm的找平层砂浆。按比例搅拌1~2遍水泥砂浆，完成1~3厘米厚的水泥砂浆找平层。找平层干燥后(7天)，用防水浆料进行防水处理。
3.防水浆料干燥后使用。
我们要注意的是，由于游泳池的水压问题，以及热天涨冷天缩，容易造成Special pool tiles间起拱甚至爆裂。因此，建议游Special pool tiles间距以10mm为宜。
Latest Information
Olympic professional standard swimming pool tiles must be made of porcelain, not earthenware.
Advantages and disadvantages of porcelain glazed tiles
By rationally selecting glaze types (matte/glossy) and construction processes, the decorative and functional properties of porcelain tiles can be effectively balanced to achieve optimal performance in humid environments.
How to choose the right pool tiles for your pool?
Choosing the right pool tiles for your pool requires considering the following key factors.
Why do some swimming pools often injure people?
The standards of pool tiles and the differences between imported pool tiles from abroad, how to avoid pool injuries to swimmers, analysis of the causes of pool injuries to swimmers.
What is the difference between glazed tiles and mosaic pool tiles?
The differences between glazed tiles and mosaic pool tiles include appearance, physical properties, installation methods, and Price.
Amoy ceramic tiles to decorate the beauty of the swimming pool
The beauty of Taotao tile decorated swimming pool
Focus on us
Titok
National Free Service Hotline
Contact Address: 9th Floor, Block D1, Green Island Plaza, Ji Hua West Road, Chancheng District, Foshan City, Guangdong Province