244x119 anti-slip tiles for swimming pool 063561
Classification:
Product Description
Standard swimming pool tiles generally refer to the tiles laid in swimming pools, including glazed tiles, stone, glass mosaics, ceramic mosaics, shell mosaics, marble mosaics, and other main materials. The products should fully meet the physical characteristics and color artistic requirements such as water pressure resistance and immersion resistance. For competitive standard pools, they must also meet the requirements of sports psychology. In recent years, swimming pools have gradually become popular in the country. The laying of standard swimming pool tiles should start with understanding the dimensions of the pool. Let's learn about the process and precautions for laying standard swimming pool tiles.
1. Determining the dimensions of the pool structure
The dimensions of a standard competition swimming pool are50m x 25m or 50m x 21m, with a length error of (0.01/00.m) from 30cm above the water surface to 80cm below the water surface on both ends of the pool wall.
2. Choosing effective waterproofing technology, waterproofing for swimming pools is very important.
The inner wall of the pool uses cement-based crystalline waterproofing, which ensures that the inner wall of the pool is leveled with cement mortar and bonded firmly with standard swimming pool tiles.
33. Wall base leveling treatment
The plane of the pool walls at both ends should be parallel and perpendicular to the planes of the side walls, and the surrounding pool walls should be perpendicular to the bottom plane of the pool.The plane error within 1 square meter should not exceed ±2mm.
44. Establishing a benchmark, determining the layout before laying standard swimming pool tiles.
The walls at both ends of the 25-meter pool are based on the centerline and divided into two sides at 2.5 meters.
55. Standard swimming pool tiles should be laid neatly.
Laying standard swimming pool tiles should start from one end wall of the pool, across the bottom of the pool to the other end wall, determining the deep blue lane marking according to the layout of standard competition pool tiles, and then laying them.
66. Applications of standard swimming pool tile adhesive
After mixing the adhesive and curing it, usean 8mm tooth to evenly scrape it on the adhesive surface. The adhesive thickness is 5-8mm. After leveling the adhesive, tiles are applied. The standard swimming pool tiles can only be grouted at least 24 hours after being adhered. The adhesive and grout on the surface of the standard swimming pool tiles should be removed immediately. After a week of completion, the swimming pool can be waterproofed and put into use.
Standard swimming pool tiles, as a mature product, have stood the test of time and have become widely used products in various types of swimming pools both domestically and internationally. The domestic product specification is115*240MM:2. The length-to-width ratio of general competition pools is just right, meeting the psychological needs of sports consumption. At the same time, due to the huge water pressure requirements in swimming pools, the width of standard swimming pool tiles should meet long-term requirements. From a construction perspective, the size modulus of standard swimming pool tiles should be as small as possible, as only in this way can the product have good safety.
Related Programmes
Data is being updated
Online Message
Amoy ceramic tiles to decorate the beauty of the swimming pool
The beauty of Taotao tile decorated swimming pool
Focus on us
Titok
National Free Service Hotline
Contact Address: 9th Floor, Block D1, Green Island Plaza, Ji Hua West Road, Chancheng District, Foshan City, Guangdong Province