How to choose tiles for the school swimming pool?

1. Function positioning of university swimming pools

 

First, let's talk about the function positioning of university swimming pools. They serve as venues for swimming training and examinations for university students, as well as training locations for athletes.Therefore, the construction of swimming pools is generally designed and built according to the standards of adult swimming pools. The construction of adult swimming pools refers to the relevant regulations in the "Swimming Competition Rules" approved by the Chinese Swimming Association and the relevant standards in the "Technical Regulations for Water Supply and Drainage Engineering of Swimming Pools" published by the Ministry of Housing and Urban-Rural Development of China to determine the specifications of swimming pools. According to the design standards for standard swimming pools, the specifications of the swimming pool are 50*25 meters, with an allowable error of +0.030 meters and -0.000 meters, and a minimum depth of 2 meters, as shown in Figure 1.Minimum 2 meters, as shown in Figure 1.

 

(Figure 1)

2Swimming pool parts are made of bricks.

 

(1) Pool edge: The edge handrail bricks (Figure 2) at the pool edge,

(Figure 2)

are installed on the long wall of the swimming pool. The unique groove design facilitates athletes using the handrail at the pool edge, combined with 244*119 specification anti-slip bricks (Figure 3). The edge area has a 15° slope with the horizontal line, and the bricks used in this area must provide good anti-slip performance. The super strong anti-slip property of the anti-slip bricks is designed for this purpose.(Figure 3)

 

(2) Pool bottom: The pool bottom is paved with light blue or white main bricks, and the lane lines are paved with dark blue bricks (Figure 4). Short pool walls: The pool walls above 0.8 meters from the water surface must be anti-slip, using rough surface bricks. The rough surface bricks are specially designed to meet German anti-slip standards, allowing athletes to have anti-slip effects when turning and pushing off in this area (Figure 5).

(Figure 4)

(Figure 5)(3) Rest platform: Also known as a resting platform, located at least 1.2 meters below the water surface, with a width of 0.1 to 0.15 meters. It can be protruding or recessed, facilitating athletes to rest at the poolside. This area is paved with specially made edge anti-slip bricks (Figure 5/6).

 

(Figure 6)

(4) Starting platform: Also known as a diving platform, using 244*199 specification anti-slip bricks (Figure 6).

 

(5) Drainage channel: Drainage channel bricks. Standard swimming pools generally come with overflow channels or drainage channels. The drainage channel is equipped with drainage channel bricks to facilitate water flow guidance and cleaning maintenance, preventing mosquito breeding (Figure 7/8).(Figure 7)

 

(Figure 8)

 

(6) Drainage channel grating: Overflow uses ABS grating with good load-bearing capacity and long service life (Figure 9).(Figure 9)(7) Paving auxiliary materials: Swimming pool special tile adhesive and swimming pool special grout. Unlike ordinary tile adhesives and cement mortar, they are made with a special formula, providing stronger bonding performance than general adhesives, suitable for long-term underwater use, avoiding hollow bricks and preventing pool water from becoming alkaline.

Pool edge walkwaySwimming pool special anti-slip bricks (Figure 11): For the materials used in the pool walkway area, it is not recommended to use ordinary floor tiles or other non-anti-slip flooring materials. It is recommended to use swimming pool special anti-slip bricks to increase the safety factor for pedestrians.

 

(Figure 11)

Shower room

The shower room floor can be paved with special anti-slip bricks or ceramic tiles with anti-slip properties (Figure 12/13).Special anti-slip bricks (Figure 12)

(图9)

(7) 铺贴辅料:泳池专用瓷砖胶及泳池专用填缝剂,不同与普通瓷砖胶和水泥砂浆,采用特制配方制作,粘接性能比一般粘接剂更强,适合于长期水下环境使用,避免泳池砖空鼓及避免池水泛碱。

 

 

 

3池岸走道

泳池专用防滑砖(图11):针对泳池走道区域的材料使用,不建议使用一般的地板砖或者其他没有防滑性能的地板材料,推荐使用泳池专用防滑砖,增加行人行走的安全系数。

(图11)

4淋浴间

淋浴室地板可采用专用防滑砖或带防滑性能的瓷质瓷砖铺贴(图12/13)

 

专用防滑砖(图12)

瓷质花岗岩砖(图13)

5更衣室地板

 

更衣室可采用具体防滑性能的木纹砖进行铺贴,图14。

 

木纹砖(图14

6整体方案

 

 

(图15)

7瓷砖的选择

市面上泳池材料有很多,作为泳池使用者和材料选用者,往往不清楚哪些产品是专业的,哪些是符合标准的,也不清楚如何选择材料?淘陶作为专业泳池砖行业的领跑者,建议大家在选择泳池砖产品上要多花些心思,第一看产品是否经过安全性设计,第二看是否经符合国家标准,是否经过检测机构检测合格;第三是否有代表性的产品使用示范案例;淘陶在泳池砖道路上走过了8年,以上3点建议可作为朋友们的参考标准。

(图16)南宁体育学校

Related Products

Other Solutions

Swimming Pool Edge Solutions

View Details

Picture Name

How to choose tiles for the school swimming pool?

View Details

Picture Name

How to build a competition swimming pool?

View Details

Picture Name

Solution for Surf Pool Tiles

View Details

Picture Name

Competitive Swimming Pool Tile Application Plan

Special swimming pool anti-slip tiles are a type of pool tiles. A common injury accident in swimming pools is when swimmers slip and fall barefoot or in flip-flops on the wet pool edge and poolside, leading to injuries. According to the friction coefficient (COF) standards of ceramic tiles in China, GB19079.1-2003:

View Details

Picture Name